Due to our traditional cooking and eating habits, as well as the fact that washing items contain muddy sand impurities, it is especially important to have a good stainless steel sink in the home. The sink is an instrument for holding a lot of water. There are many types of kitchen sinks. So how do you choose a stainless steel sink? What should you pay attention to when purchasing? Next, the stainless steel sink manufacturer will lead you to see how to choose a stainless steel sink.
The thickness of the steel plate of the stainless steel sink is preferably selected between 0.8 and 1.2 mm. Within this thickness, 304# stainless steel is selected to make the sink tough, and the damage of various kinds of porcelain utensils due to impact or the like can be avoided to the utmost extent. The easiest way is to press the surface of the sink a little bit. If it is pressed, the material is very thin.
The light and thin thin edges not only make the sink's maximum washing space and minimum size uniform, but also the water splashing out of the sink can be easily slid into the sink.
Stainless steel sink manufacturer
Stainless steel is a kind of iron alloy. The specific gravity of steel is 7.87. Nickel and chromium heavy metals are added inside. The specific gravity of these metals is larger than that of steel, so the weight is relatively heavy. Counterfeit stainless steel, such as steel plate chrome, is lighter.
The stainless steel sink process has a welding method and an integral molding method. The welding method is divided into two types according to the method. One is the welding of the pot and the panel welded together. The advantage is that the appearance is beautiful. After strict treatment, the welding joint is not easy to be found, and the surface of the sink is straight and smooth. The disadvantage is that some consumers Suspicion of its solidity. In fact, the current welding technology mainly has sub-arc welding and the most advanced numerical control resistance welding, the quality has passed; the other is two single-pot butt welding integrated butt welding, the advantage is that the basin and the panel are integrally formed and stretched. Durable, its shortcoming is easy to see the welding marks, the flatness is slightly worse. One-time molding is a relatively advanced and popular production process, but the production process is difficult, and the overall thickness of the water tank after forming is uneven, relatively thin, mostly about 0.7mm, and the better basin thickness should be 0.8–1.0. Mm, not the thicker the better, the thicker the material is too bulky, easy to deform the cabinet, it will also hurt the tableware, 0.8–1.0mm is the best thickness, long life, the vessel will be safe.